欢迎您访问莱州聚峰机械有限公司网站!
搅拌机行业持续先行者!
点击拨打服务热线:400-879-1999
您的位置: 首页 > 新闻资讯小型搅拌车发动机过热的急救措施是什么?

新闻资讯

产品

新闻

  • 小型搅拌机的正确操控有哪些要求
  • 搅拌机使用时4大“控制”达到目的
  • 混凝土搅拌机检修的方法有哪些
  • 小型搅拌机零件气门的顺利使用方式
  • 混凝土搅拌机的操作保养关注事项
  • 什么原因导致搅拌机存在抱轴问题

全国服务热线

400-879-1999
新闻资讯 /

小型搅拌车发动机过热的急救措施是什么?

来源:http://www.zkhntjbc.com/ 日期:2020-09-10
概述:小型搅拌车发动机过热,一般就是司机朋友们所说的走高温,发动机走高温是不好的,运气不好可能使发动机坏掉。出现这种情况怎么办?要怎样解
小型搅拌车发动机过热,一般就是司机朋友们所说的走高温,发动机走高温是不好的,运气不好可能使发动机坏掉。出现这种情况怎么办?要怎样?以下紧急措施希望可以帮助到大家。
The overheated engine of a small mixer is generally what the drivers call high temperature. It's bad for the engine to run at high temperature. Bad luck may cause the engine to break down. What to do if this happens? How to solve this problem? I hope the following emergency measures can help you.
1、如果在普通公路上发动机出现了过热,应该尽快地降低车速,把搅拌车驶到树荫下,或驶到相对比较凉快的地方,将小型搅拌车停下来。打开发动机罩盖,让发动机怠速运转,等待发动机温度逐渐恢复正常。
1. If the engine overheats on ordinary roads, the speed of the mixer should be reduced as soon as possible, and the mixer should be driven to the shade of trees or to a relatively cool place to stop the small mixer. Open the engine cover, let the engine idle and wait for the engine temperature to gradually return to normal.
在发动机水温恢复正常之后,将发动机熄火。然后再等待一段时间,直到发动机的水温充分地下降了之后,再检查发动机的冷却水量。这时发动机的冷却水量大都严重不足。按着规定量把冷却水补足之后,再检查一下冷却系统,确认没有其他故障之后,可以起动发动机,继续行驶。

After the engine water temperature returns to normal, turn off the engine. Then wait for a period of time until the water temperature of the engine drops sufficiently, and then check the cooling water quantity of the engine. At this time, most of the cooling water of the engine is seriously insufficient. After making up the cooling water according to the specified amount, check the cooling system again, and after confirming that there are no other faults, you can start the engine and continue driving.
2、如果在高速公路上出现了发动机过热,需要立刻把暖风全部打开并打开车窗。由于有暖风帮助冷却水散热,能使冷却水温大幅度地下降。
2. If the engine overheats on the highway, it is necessary to turn on all the warm air and open the windows immediately. Due to the warm air to help the cooling water dissipate heat, the cooling water temperature can be greatly reduced.
这样可以持续开车,就近找到高速公路的出口,将搅拌车驶到一定的场所停下来。接下来,只要按照上述的方法,使发动机的温度降下来就行。注意,好不要把搅拌车停在路边,以免影响交通或被撞车,把小型搅拌车停在的场所。
This can continue to drive, find the exit of the highway nearby, and drive the mixer to a certain place to stop. Next, as long as the above method, so that the engine temperature down on the line. Attention, do not park the mixer on the side of the road, so as not to affect the traffic or be hit by the car. Park the small mixer in the place.

截屏,微信识别二维码