In order to ensure the mixing quality of concrete, it is required that the concrete mixture should be evenly mixed, the mixing time is short, the discharge is fast, the residual amount is less, the energy consumption is low and the pollution is less. The main factors that affect the mixing quality of small concrete mixer are: the structure of mixer, the ratio of the feeding capacity of mixer to the geometric volume of mixing drum, the feeding procedure and position of mixture, the configuration and arrangement of mixing blades, the mixing speed and the wear condition of blade liner, etc.

小型混凝土搅拌机的维护保养：

Maintenance of small concrete mixer:

1、保养机体的清洁，机体上的污物和障碍物。

1. Maintain the cleanliness of the body, remove the dirt and obstacles on the body.

2、检查各润滑处的油料及电路和控制设备，并按要求加注润滑油。

2. Check the oil, circuit and control equipment at each lubricating place, and add lubricating oil as required.

3、每班工作前，在搅拌筒内加水空转1--到2min，同时检查离合器和制动装置工作的可靠性。

3. Before each shift, add water to the mixing drum and idle for 1-2min. At the same time, check the reliability of clutch and brake device.

4、混凝土搅拌机运转过程中，应随时检听电动机，减速器，传动齿轮的噪声是否正常，温升是否过高。

4. During the operation of concrete mixer, it is necessary to check whether the noise of motor, reducer and transmission gear is normal and whether the temperature rise is too high.

5、每班工作结束后，应认真清洗混凝土搅拌机。

5. After each shift, the concrete mixer shall be cleaned carefully.

是自上料搅拌机和小型装载机行业的知名生产厂家，占地面积约10万，员工600余人。公司在“以技术为先导，使自然和环境清新和谐；以过硬的产品质量、科学有效的管理、规范的服务，发展成为深受顾客欢迎、广受顾客信赖的企业。

It is a well-known manufacturer in the feeding mixer and small loader industry, covering an area of about 100000 square meters and employing more than 600 people. The company in the "technology as the guide, so that the nature and the environment fresh and harmonious; With excellent product quality, scientific and effective management and standardized service, it has developed into an enterprise that is popular with customers and widely trusted by customers.