我想每个人都知道一个广泛使用的自喂混合器,但没有人知道一些与油的变化有关的问题。接下来,我将解释自喂混合器如何在不改变油含量的情况下避免油的积累。
I think everyone knows a widely used self feeding mixer, but no one knows some problems related to the change of oil. Next, I will explain how the self feed mixer can avoid oil accumulation without changing the oil content.
使用柴油机时,机油对润滑、冷却和清洗非常重要。因此,许多自喂混合器司机注意检查油的添加量,并按标准添加,而忽视检查油的质量,及时变质的油。这导致部分运动的发动机,总是在一个很差的润滑环境下运行,以促进磨损的每个组件。
When using diesel engine, oil is very important for lubrication, cooling and cleaning. Therefore, many self feeding mixer drivers pay attention to check the amount of oil added, and add according to the standard, but ignore the quality of oil, and timely remove the deteriorated oil. This results in partial motion of the engine, always running in a very poor lubrication environment to promote wear of each component.
通常,在正常情况下,机油损失不是很大,但它会造成污染,失去对柴油机的保护。在柴油机运行过程中,许多污染物(煤烟、焦碳、燃料不完全燃烧产生的水垢)进入机油。对于新机器或大修的机器,在运行测试后杂质会增加。如果不进行更换,可能会发生烧砖和轴固定等事故。
Usually, under normal circumstances, the loss of oil is not very big, but it will cause pollution and lose the protection of diesel engine. During the operation of diesel engine, many pollutants (soot, coke, scale produced by incomplete combustion of fuel) enter the engine oil. For new or overhauled machines, impurities will increase after running tests. If it is not replaced, accidents such as brick burning and shaft fixing may occur.
另外,在换油时,由于缺乏维修经验或故障,部分司机在更换过程中不能完全清洁油路,导致油底壳和油道内机械杂质。
In addition, due to the lack of maintenance experience or failure, some drivers can not completely clean the oil circuit during the replacement process, resulting in mechanical impurities in the oil pan and oil passage.
这是对加料混合器换油的重要介绍。我希望它对你有帮助。
This is an important introduction to the refueling mixer. I hope it helps you.
以上就是对
中科自上料搅拌机机油更换应该注意什么的详细介绍,想要了解更多请点击官网
http://www.zkhntjbc.com
The above is a detailed introduction of what should be paid attention to in the oil change of the self feeding mixer of China Science and Technology Corporation. To learn more, please click http:/www.zkhntjbc.com