1.8方小型混凝土搅拌机以其小巧可灵敏挪动的特性为很多人所知，那么小型混凝土搅拌机怎样运用呢，我们就来引见一下小型混凝土搅拌机如何运用？
1.8 square small concrete mixer with its small and sensitive to move characteristics for a lot of people know, so how to use small concrete mixer, we will introduce how to use small concrete mixer?
：选择平整坚实的场地，四周有良好的排水沟渠，将1.8方小型混凝土搅拌机推场地，等候备用。
First: choose a flat and solid site, surrounded by good drainage ditch, push 1.8 square meters of small concrete mixer to the site, waiting for standby.
第二：检查混凝土搅拌机的轴承、电动机和电器元件的接线结实，维护接零或接地电阻能否契合规则，如有异常需求立刻改换。
Second: check the concrete mixer bearing, motor and electrical components of the wiring firm, maintenance zero or grounding resistance can fit the rules, if there is abnormal demand immediately change.
第三：接上混凝土搅拌机的电源，按下启动按钮，使混凝土搅拌机空载运转，检查搅拌桶或叶片旋转方向与筒体上箭头的方向能否分歧。
Third: connect to the power supply of the concrete mixer, press the start button to make the concrete mixer run without load, check the direction of rotation of the mixing barrel or blade and the direction of the arrow on the barrel can be divided.
第四：搅拌机启动后，应使搅拌筒到达正常转速后停止上料，上料时及时加水。加料的次序为石子--水泥--沙子或者沙子--水泥--石子。
Fourth: after the mixer is started, the mixing cylinder should stop feeding after reaching the normal speed, and water should be added in time when feeding. The order of feeding is stone - cement - sand or sand - cement - stone.
第五：1.8方小型混凝土搅拌机处在搅拌的工作中时，留意察看机械的运转状况，当有异常或轴承温升过高等现象时，应停机检查。
Fifth: 1.8 square small concrete mixer in the work of mixing, pay attention to the operation of the machinery, when there is abnormal or bearing temperature rise too high phenomenon, should stop inspection.
第六：完成一次搅拌工作后，将搅拌筒内的搅拌物全部倒出后，方可参加新的搅拌物。
Sixth: after the completion of a mixing work, will be in the mixing cylinder all the mixing out, can participate in the new mixing.
第七：运用过后要及时洁净，以免剩余的搅拌物吸附在搅拌筒壁上，1.8方
混凝土搅拌机采用底盘发起机取力方式。安装的作用是经过全功率驱动器将发起机动力取出，经液压系统驱动搅拌筒，搅拌筒在进料和运输过程中正向旋转，以利于进料和对混凝土停止搅拌，在出料时反向旋转，在工作终结后切断与发起机的动力联接。
Seventh: after use to timely clean, so as to avoid the remaining mixing material adsorption on the mixing cylinder wall, 1.8 square concrete mixer adopts chassis starter to take force. The function of installation is to take out the power of the starter through the full power driver, and drive the mixing cylinder through the hydraulic system. The mixing cylinder is rotating in the process of feeding and transportation, so as to facilitate the feeding and stop mixing of concrete, reverse rotation when discharging, and cut off the power connection with the starter after the end of work.
全国服务热线
点击拨打服务热线：400-879-1999
