混凝土搅拌机经常性进行高强度的搅拌工作，所以长期下来，它的罐体就会变得越来越小，粘灌的问题就随之出现了，原因是没有清洗好是材料粘在罐壁了，那么混凝土搅拌机粘灌了怎么处理？

　　Concrete mixer often high intensity mixing work, so for a long time, its tank will become smaller and smaller, the problem of sticking irrigation will then appear, the reason is that there is no good cleaning is the material stuck in the tank wall, so how to deal with the concrete mixer sticking irrigation?

　　每次出车任务完成回到站内的时候，检查储水罐内的水量，让水罐中的水随时处于满罐的状态，以备不时之需。

　　Check the amount of water in the water storage tank when you return to the station after each vehicle mission, so that the water in the tank is always in the state of full tank, in case of emergency.

　　减水剂是一种在维持混凝土坍落度不变的条件下，能减少拌合用水量的混凝土外加剂，随车携带，能对混凝土进行很好的调节。不过在加入减水剂的时候，一定要记得有商砼站化验室的人在场，否则混凝土质量强度不够，驾驶员要承担后果。

　　Water reducing agent is a kind of concrete admixture which can reduce the amount of water used for mixing under the condition of maintaining the constant slump of concrete. It is carried by car and can be well adjusted to concrete. However, when adding water reducing agent, we must remember the presence of people in the laboratory of commercial concrete station, otherwise the quality of concrete strength is not enough, and the driver should bear the consequences.

　　混凝土运距一般在直径30千米范围以内，出车之前规划好路线以及车辆通行情况，尽量减少自动上料搅拌车在路上的时间。

　　The concrete transport distance is generally within the diameter of 30 km. The route and vehicle traffic are planned well before the vehicle is released, so as to minimize the time of the automatic feeding mixer on the road.

　　可能会因为原料的不同，每一盘混凝土质量都会有变化。在装好混凝土离场时，一定要检查罐内混凝土的塌落度情况以及和易度，小心混凝土的提前凝结和混凝土分层沉淀。

　　Because of the different raw materials, the quality of each plate of concrete will change. When loading the concrete to leave the field, be sure to check the collapse of the concrete in the tank and the degree of workability, be careful of the advance setting of concrete and concrete layered precipitation.

　　如果遇到人为因素或者不可抗因素，导致长时间无法卸料的情况，应随时查看罐内混凝土情况，一旦发现混凝土开始凝结。在报备负责人之后立刻进行卸料，以防整个罐体报废。

　　If human factors or irresistible factors, resulting in a long time can not discharge the situation, should be at any time to check the concrete in the tank, once found that the concrete began to condense. Discharge immediately after reporting to the person in charge to prevent the whole tank from being scrapped.

　　混凝土搅拌机粘灌了怎么处理？以上便是方法了，大家学会之后就能很大程度上避免这个问题，就可以提升自己的工作效率，减少物料损失。更多内容就来网站www.zkhntjbc.com咨询吧！

　　Concrete mixer stick filling how to deal with? The above is the method, we can largely avoid this problem after learning, you can improve your work efficiency, reduce material loss. More content to the website www.zkhntjbc.com consultation!