自动混凝土搅拌机在使用过程中难免会有一些问题出现，比如他的零部件--轮胎，这在工程中可是起到大作用的东西，下面小编就来讲讲搅拌机零部件的使用常识。

It is inevitable that some problems will occur during the use of the automatic concrete mixer. For example, its parts -- tires, which play an important role in the project, will be introduced in the following sections.

轮胎负荷

Tyre load

车辆的负荷越大，则轮胎的寿命越短，这点是毋庸置疑的。尤其是在超载的情况下，更加突显。正规轮胎厂家生产的轮胎都标又载重指数。轮胎应在指定的载重指数所对应的大载重量内使用。

There is no doubt that the greater the load of the vehicle, the shorter the life of the tire. Especially in the case of overload, it is more prominent. The tires produced by regular tire manufacturers are standard load index. Tires shall be used within the heavy load corresponding to the specified load index.

行驶速度

Travel speed

正规轮胎厂家生产的轮胎都标又素服级别指数。轮胎应在指定的速度计别指数所对应的高行驶速度内使用。

The tires produced by regular tire manufacturers are all standard and simple service grade indexes. Tires shall be used at the high driving speed corresponding to the designated speed indicator.

轮胎温度

Tyre temperature

车辆在行驶过程中，轮胎由于受到伸张、压缩和摩擦，引起胎温升高。过高的温度容易加剧轮胎磨损甚发生爆胎。

When the vehicle is running, the tire temperature rises due to stretching, compression and friction. Excessive temperature is easy to aggravate tire wear and even tire blowout.

底盘状况

Chassis condition

前、后车轴的平行度、四轮定位、制动装置工作状况以及底盘其他机件技术、状况都会不同程度地影响到车辆轮胎的寿命。一旦出现严重的交通碰撞事故，车主一定要将车辆开到维修站进行底盘状况检查及调整。

The parallelism of the front and rear axles, four-wheel alignment, working conditions of the braking device, and the technology and conditions of other chassis parts will affect the service life of the vehicle tires to varying degrees. In case of a serious traffic collision, the owner must drive the vehicle to a professional maintenance station for chassis condition inspection and adjustment.

胎面无裂纹

No cracks on the tread

定时检查商品搅拌机轮胎表面有无裂纹、变形等缺陷。商品搅拌机轮胎的花纹沟由于行驶磨损而逐渐变浅，如果磨平就会失去排水防滑等作用，商品搅拌机各项性能将大大降低，而看似细小的裂纹更是高速行驶时爆胎的隐患。此外还要注意及时凹槽中的小石子。

Regularly check the surface of the commercial mixer tire for cracks, deformation and other defects. The tread groove of the commercial mixer tire gradually becomes shallow due to driving wear. If it is smoothed, it will lose the function of drainage and anti-skid, and the performance of the commercial mixer will be greatly reduced. The seemingly small cracks are the hidden danger of tire burst when driving at high speed. In addition, pay attention to the timely removal of small stones in the groove.

避免急刹车

Avoid sudden braking

起步不可过猛，要避免频繁使用刹车和紧急刹车，以免因商品搅拌机轮胎与地面拖曳而加速胎面磨损；在拐弯会车、超车、通过交叉路口、狭窄路面、铁路道口等地段时，应掌握适当的车速且要注意路面、行人、车辆动态，做好制动准备，减少频繁制动，避免紧急制动，从而降低商品搅拌机轮胎磨损；面临无法避开的碎玻璃或其他异物时，要减速通过，千万不要急刹车，因为急刹车造成压强增大，玻璃碎片和异物更容易扎入商品搅拌机轮胎。

Do not start too hard, and avoid frequent use of the brake and emergency brake to avoid accelerated tread wear due to the drag of the commodity mixer tire and the ground; When meeting, overtaking, crossing intersections, narrow roads, railway crossings and other sections, you should master the appropriate speed, pay attention to the dynamics of the road, pedestrians and vehicles, make braking preparations, reduce frequent braking, avoid emergency braking, so as to reduce the wear of the tires of the commodity mixer; When you are faced with broken glass or other foreign matters that cannot be avoided, you should slow down and do not brake suddenly. Because the pressure increases due to sudden braking, glass fragments and foreign matters are more likely to get into the tires of the commodity mixer.

此外搅拌机轮胎在夏季长时间行驶或高速行驶时容易过热，同时气压增高。此时应停车散热，严禁放气降压或泼水降温，以防胎面橡胶的非正常老化。关注我们http://www.zkhntjbc.com，了解更多内容！

In addition, the mixer tires are easy to overheat when driving for a long time or at high speed in summer, and the air pressure increases. At this time, the vehicle shall be stopped to dissipate heat. It is strictly forbidden to deflate and depressurize or splash water to cool down, so as to prevent abnormal aging of tire tread rubber. Follow us http://www.zkhntjbc.com , learn more!