Small concrete mixer for housing construction of concrete mixing, can be said to be a great contribution, in the transportation process, will walk while mixing concrete. Prevent concrete from drying. Construction engineers should consider the following points in selecting such engineering equipment:

1、浇注要素：应当根据工程对象、特点、及要求的输送距离、建筑计划、泵形式以及具体的条件行综合考虑。

1. Pouring elements: it should be considered comprehensively according to the project object, characteristics, and required transportation distance, construction plan, pump form and specific conditions.

2、建筑的类型和结构：小型混凝土搅拌车的性能随机型而异，选用机型之时除进考虑浇注量以外，还应该考虑建筑的类型和结构、施工技术要求、现场条件和环境等。通常所选用的混凝土搅拌车的主要性能参数应与施工要求相符或稍大，若能力过大，则利用率低，过小，不仅仅满足不了要求还会加速混凝土搅拌车的损耗。

2. The type and structure of buildings: the performance of small-scale concrete mixer varies randomly. In addition to the amount of pouring, the type and structure of the building, construction technical requirements, site conditions and environment should be considered when selecting the model. Generally, the main performance parameters of the selected concrete mixer should be consistent with the construction requirements or slightly larger. If the capacity is too large, the utilization rate will be low and too small, which will not only fail to meet the requirements, but also accelerate the loss of the concrete mixer.

3、臂架：臂架高度越高，浇注高度和布料半径就越大，施工适应性也越强，放在施工中应尽量选用高臂架小型混凝土搅拌车。

3. Boom: the higher the boom height is, the greater the pouring height and distribution radius are, and the stronger the construction adaptability is. Small concrete mixer with high boom should be selected as far as possible in construction.

4、业务量：可根据浇注量、单机的实际输送量和施工作业时间进行计算。

4. Business volume: it can be calculated according to the pouring amount, the actual conveying volume of single machine and the construction operation time.

小型混凝土搅拌车在选用的时候，按照以上要求进行选用。选择合适的搅拌车进行搅拌。它的使用只有经过了实验操作过，才能积累更多的操作经验。才能提率，延长寿命。

The small concrete mixer truck shall be selected according to the above requirements. Select a suitable mixer for mixing. Its use only after the experimental operation, in order to accumulate more operating experience. In order to improve efficiency and prolong life.