After all, it's a small probability event to meet the poor quality tire of automatic concrete mixer. If the tire is damaged, the driver should first review his own way of using the car. As long as the driver develops a good habit of car maintenance, the service life of the tire of automatic concrete mixer can be greatly improved.

1、避免原地打方向

1. Avoid heading in place

由于车感不佳，很多新手都喜欢原地打方向，这个坏习惯基本上是从驾校里面带出来的。原地打方向会令轮胎的磨损集中在同一个接触面上，造成轮胎局部严重磨损，缩短使用寿命。因此，司机应避免原地打方向，而应该在轮胎滚动时打方向，这样的话，地面给混凝土搅拌罐轮胎带来的才是且均匀的正常磨损。

Because of the bad feeling of the car, many novices like to play in the same direction. This bad habit is basically brought out of the driving school. Steering in place will make the tire wear concentrated on the same contact surface, resulting in severe local tire wear and shorten the service life. Therefore, the driver should avoid steering in place, but should steer when the tire is rolling. In this way, the tire of concrete mixing tank will be worn in all directions and evenly.

2、避免撞击路肩和陷入坑洞

2. Avoid bumping shoulders and getting into potholes

有些司机的停车方式比较霸气，他们喜欢让车骑上路肩停放。在自动混凝土搅拌机 骑上路肩的过程中，轮胎会受到挤压，容易导致自动混凝土搅拌机轮胎侧面的帘子线断裂，造成轮胎鼓包。

Some drivers are more aggressive in their way of parking. They like to park their cars on the shoulder of the road. In the process of automatic concrete mixer riding on the road shoulder, the tire will be squeezed, which is easy to cause the tire cord fracture on the side of the automatic concrete mixer tire, resulting in tire bulging.

路面的坑洞同样要避开。当自动混凝土搅拌机轮胎碾过坑洞时，混凝土搅拌罐轮胎同样会受到挤压。坑洞越大、车速越高，轮胎受到的挤压力度也越大，这样也会导致轮胎出现鼓包。

Holes in the road should also be avoided. When the tire of automatic concrete mixer runs over the hole, the tire of concrete mixing tank will also be squeezed. The bigger the hole is and the higher the speed is, the greater the pressure on the tire will be, which will also lead to the bulge of the tire.

3、避免蹭胎壁

3. Avoid rubbing against the tire wall

很多时候，蹭胎壁是在轮靠边时无意中造成的，可能是司机车感不佳，也可能是司机开小差。轮轮胎侧面属于轮胎的薄弱部位，磨损严重的话也会造成轮胎鼓包，带来爆胎的隐患。因 此，司机在靠边停车的时候，应该多留心轮与路肩的距离，避免蹭胎壁。

Most of the time, rubbing against the tire wall is unintentionally caused when the wheel is pulled to the side. It may be the driver's poor feeling of the car or the driver's driving away. The side of the tire belongs to the weak part of the tire. If it is worn seriously, it will also cause the tire bulge and bring the hidden danger of tire burst. Therefore, the driver should pay more attention to the distance between the wheel and the shoulder to avoid rubbing the tire wall.

4、保持合适的胎压

4. Maintain proper tire pressure

合适的胎压能保证轮轮胎的接地面积均匀，减少不必要的磨损。因此，司机应该养成定期检测胎压的习惯，随时了解轮胎的胎压状况。检测胎压可以到的维修店，也可以购买胎压计自己检测， 胎压标准可参照混凝土搅拌罐的胎压标签。

The proper tire pressure can ensure the uniform ground area of the tire and reduce unnecessary wear. Therefore, drivers should develop the habit of regular tire pressure detection, and know the tire pressure status at any time. The tire pressure can be detected at a professional repair shop or by purchasing a tire pressure gauge. The tire pressure standard can refer to the tire pressure label of the concrete mixing tank.

5、夏天不要降低胎压

5. Don't lower the tire pressure in summer

不少司机错误地认为，夏天气温高，降低胎压能避免爆胎。这样操作，轮轮胎与地面的接触面会加大，摩擦力增加，加快轮胎磨损，而且会导致轮胎温上升更快，更容易爆胎。所以，夏天依然要保持正常的胎压。

Many drivers mistakenly believe that the high temperature in summer can prevent tire burst by reducing the tire pressure. In this way, the contact surface between the tire and the ground will increase, the friction will increase, the tire wear will be accelerated, and the tire temperature will rise faster, and the tire will burst more easily. Therefore, the normal tire pressure should be maintained in summer.