The use of temperature of automatic concrete mixer is very critical, and its temperature is a key point that can not be ignored in the actual operation process of customers. It is expected that everyone will pay more attention to the temperature and condition of the mixer in the process of operation in case of common faults and bad things. I'll tell you how to adjust the temperature of the automatic concrete mixer.

搅拌机利用时要插上开关电源，将配有溶液的容器置放在加温盘的中间，并把电机转子放进容器的溶液中。

When using the mixer, plug in the switch power supply, place the container with solution in the middle of the heating plate, and put the motor rotor into the solution of the container.

打开开关电源，教唆灯亮了，然后顺时针方向调节变速旋钮，速率由慢快，调为所需速率，电机转子转动推动溶液开展拌和实际操作。需控温加温时，将温度测量摄 像 头插 进溶液中，非标准搅拌机并将电源插头插 进搅拌机后排座上，调节温度旋钮所需温度就可以。

Turn on the switch power supply, the abettor light is on, and then adjust the speed knob clockwise to adjust the speed from slow to fast to the required speed. The motor rotor turns to push the solution to carry out the actual mixing operation. To control the temperature, insert the temperature measurement camera into the solution, plug the power plug into the back seat of the non-standard mixer, and adjust the temperature knob to the required temperature.

若对溶液温度精 密度要求恰当时，要用温度计另外测量溶液温度，再调节温度旋钮以做到要求温度。若不需加温，仅有把温度调节旋钮调室内温度下列就可以。某些大伙儿按照上边的方式来为自动混凝土搅拌机调节温度就无须担忧会展现难题了，之上是十分合理的方式详细介绍，期待大伙儿很有可能按照流程开展

If the precision of solution temperature is required properly, a thermometer should be used to measure the solution temperature, and then the temperature knob should be adjusted to achieve the required temperature. If there is no need to heat up, just adjust the temperature adjustment knob below the indoor temperature. Some people adjust the temperature for the automatic concrete mixer according to the above way, so there is no need to worry about the problem. The above is a very reasonable way to introduce in detail, and we hope that everyone will probably carry out the work according to the process