Small concrete mixers usually need to set up two automatic and manual control modes. Manual working mode is mainly used for system maintenance or software debugging. Generally, automatic working mode is adopted in the production process. Therefore, you should set manual, automatic selection and corresponding buttons, and set the indicator light of each button to easily check the system when the system does not work normally. Automatic control can be used after the equipment is running.

从原料到成品的混凝土工艺是计量输送-进料-搅拌-卸料。每个链路都有自己的设备组件。这些设备的操作由控制系统集中管理。每个部件的运行状态显示在控制系统的计算机屏幕上。系统的逻辑控制主要负责PLC。它可以接收来自主计算机的各种输入信号，例如开关，按钮和接触器状态和命令，以控制各种动作，包括配料仪器的启动和停止以及电机的顺序启动和停止控制。，链控制和保护控制。

The concrete process from raw materials to finished products is metered transportation - feeding - mixing - unloading. Each link has its own device components. The operation of these devices is centrally managed by the control system. The operating status of each component is displayed on the computer screen of the control system. The logic control of the system is mainly responsible for PLC. It can receive various input signals from the host computer, such as the status and commands of switches, buttons and contactors, to control various actions, including the start and stop of batching instruments and the sequential start and stop control of motors., Chain control and protection control.

水泥筒仓是用于储存散装物料的罐装设备，常用于在移动混凝土搅拌站中储存水泥。但是，水泥筒仓有时会出现一些故障。例如，有时水泥不会进入水泥筒仓。原因是什么？怎么？

Cement silo is a canning equipment used to store bulk materials. It is often used to store cement in mobile concrete mixing plant. However, cement silos sometimes have some failures. For example, sometimes cement does not enter the cement silo. Why? How?

直观的原因是水泥筒仓的冲裁锥阀无法打开。除此之外，可以直接观察到当水泥罐处于正压状态时，水泥不会进入，并且水泥筒仓的排气阀泄漏也会导致水泥不适应。

The intuitive reason is that the blanking cone valve of the cement silo cannot be opened. In addition, it can be directly observed that when the cement tank is in a positive pressure state, the cement will not enter, and the leakage of the exhaust valve of the cement silo will also cause the cement to not adapt.

由于这些原因，我们可以采取一些方案。

For these reasons, we can take some solutions.

1，有必要检查水泥筒的气缸活塞和连杆是否处于运行状态。如果没有操作或运行，则需要检查气缸的供气阀是否泄漏或未堵塞。气体，在这种情况下，开关阀可以清洁和密封。

1. It is necessary to check whether the cylinder piston and connecting rod of the cement cylinder are in operation. If there is no operation or operation, it is necessary to check whether the air supply valve of the cylinder is leaking or not blocked. In this case, the on-off valve can be cleaned and sealed.

2.如果是水泥筒仓压力的原因，有必要检查水泥筒仓排气阀的托盘橡胶是否正常运行。如果没有正常运行，应及时更换。

2. If the reason is the pressure of the cement silo, it is necessary to check whether the tray rubber of the cement silo exhaust valve operates normally. If it does not operate normally, it shall be replaced in time.

3.由于排气阀的空气泄漏，可以打开水泥筒仓的排气盘以排出气体。

3. Due to the air leakage of the exhaust valve, the exhaust disc of the cement silo can be opened to exhaust the gas.

以上就是小型混凝土搅拌机厂家为您介绍的相关的内容，希望可以帮助到您，更多精彩内容可以直接关注：http://www.zkhntjbc.com如有任何疑问都有在线客服为您进行详细的解答。

The above is the relevant content introduced to you by the small concrete mixer manufacturer. I hope it can help you. More wonderful contents can be directly focused on: http://www.zkhntjbc.com If you have any questions, online customer service will answer them in detail.