The full-automatic concrete mixer has been carefully debugged by the Engineer at the beginning of the construction of the re mixing plant, so the daily operation is relatively simple for the operator. Open the control panel of the concrete mixer, we can see many buttons. Here is the control system of the concrete mixer. As an operator, you need to clearly understand the function of each button and be able to do basic maintenance work.

下面就来讲一下全自动混凝土搅拌机的具体操作步骤

Let's talk about the specific operation steps of the full-automatic concrete mixer

1、正确的开机顺序，将支柱上的功能开关切换到自动挡，然后再按下启动开关，这样整个过程就可以自动运行了。

1. Correct startup sequence, switch the function switch on the pillar to automatic gear, and then press the start switch, so that the whole process can run automatically.

2、如果中途需要停止，要先按下停止，并等机器完全停止，需要运行时，重新启动就行了。

2. If you need to stop halfway, you should first press stop and restart the machine when it needs to run.

3、混凝土搅拌机的显示屏幕上会显示时间，快慢速，停止等按钮，相关的指示灯也会开始闪烁。

3. The display screen of the concrete mixer will display the time, fast, slow, stop and other buttons, and the relevant indicator lights will also start to flash.

4、搅拌工作完成后，将模式调回到手动模式，然后切断电源开关。

4. After mixing, adjust the mode back to manual mode, and then cut off the power switch.

客户在操作上须严格遵循这个操作步骤，保证混凝土搅拌机的平稳运行，既简单又方便，

The customer must strictly follow this operation step to ensure the smooth operation of the concrete mixer, which is simple and convenient,

在混凝土搅拌站中，控制系统的电缆是与控制室连接的。除了JS混凝土搅拌机，其他配套设备也是在控制系统下完成的。维修人员在工作结束后还需要注意加注润滑油、记录设备磨损情况和完成清洗工作。

In the concrete mixing plant, the cable of the control system is connected with the control room. In addition to JS concrete mixer, other supporting equipment is also completed under the control system. Maintenance personnel shall also pay attention to filling lubricating oil, recording equipment wear and completing cleaning after work.