搅拌机的较高，行驶范围内的路况一般比较差，因此更要重视行车的，而刹车是搅拌机上使用为频繁的部件之一，刹车性能的好坏对整车的相当重要，下面来讲讲判断搅拌机刹车异常的五个方法。

The center of gravity of the mixer is high, and the road conditions within the driving range are generally poor, so we should pay more attention to the safety of driving. The brake is one of the frequently used parts on the mixer, and the brake performance is very important to the safety of the whole vehicle. Here are five methods to judge the abnormal brake of the mixer.

1.刹车异常要注意：踩刹车时，刹车系统发出尖锐刺耳的金属摩擦声，这可能是因为刹车片变薄、刹车坑洼、刹车片中有异物或刹车盘生锈等导致，一般情况下多踩几脚刹车异响都会有缓解。

1. Attention should be paid to abnormal braking: when stepping on the brake, the brake system will make a sharp and harsh metal friction sound, which may be caused by the thinning of the brake pads, brake potholes, foreign bodies in the brake pads or rust of the brake disc. Generally, stepping on more than a few feet will alleviate the abnormal braking sound.

2.刹车踏板行程变长，就是我们常说的刹车变软。刹车行程变长的原因主要是刹车系统中进入空气、缺少刹车油，可能是存在泄漏、刹车片磨损严重等。

2. The brake pedal travel becomes longer, which is what we often call brake softening. The main reasons for the longer brake travel are the air entering the brake system and the lack of brake oil, which may be due to leakage and serious wear of the brake pads.

3.刹车跑偏，刹车跑偏的现象一般出现的不多，主要体现在踩刹车时方向盘有明显的向一侧偏转。导致这种现象的原因可能是刹车片偏磨、刹车分泵有问题等。

3. The phenomenon of brake deviation is generally rare, which is mainly reflected in the obvious deflection of the steering wheel to one side when stepping on the brake. The causes of this phenomenon may be the eccentric wear of the brake pads, problems with the brake cylinder, etc.

4.刹车变硬，很多司机会碰到刹车变硬的问题，刹车变硬的主要原因是真空助力器故障导致刹车无助力、频繁踩刹车后导致等造成。

4. The brake becomes hard, and many drivers will encounter the problem of the brake becoming hard. The main reasons for the brake becoming hard are the failure of the vacuum booster, which leads to the lack of assistance of the brake, and the frequent application of the brake.

5.踩刹车时反弹，这种情况也比较常见，在踩下刹车时刹车踏板有反弹顶脚的现象，这种现象多是刹车盘、刹车片表面不平、钢圈变形等导致的。

5. It is also common to rebound when stepping on the brake. When stepping on the brake, the brake pedal bounces against the foot. This phenomenon is mostly caused by the uneven surface of the brake disc and brake pad, and the deformation of the steel ring.

在驾驶混凝土搅拌机的过程中，如果你感觉刹车不正常，一定不能大意，自己先停车查看原因，如果自己搞不定，就到维修站去维修，千万不要拖延时间，否则能出现大问题就得不偿失了。关注我们http://www.zkhntjbc.com，了解更多！

In the process of driving the concrete mixer, if you feel that the braking is abnormal, you must not be careless. Stop first to check the reason. If you are not sure, go to the maintenance station for maintenance. Don't delay time, otherwise big problems will outweigh the gains. Follow us http://www.zkhntjbc.com , learn more!