There are many kinds of mixers. According to different methods, different kinds of mixers can be obtained. Small mixers are used for concrete mixing in small-scale engineering construction and raw material proportioning in small-scale coal and chemical industry. They can replace labor, greatly improve work efficiency and save manpower.

小型搅拌机分为立式搅拌机、双轴搅拌机、轮碾式搅拌机的小型搅拌机，动力消耗少，易操作产量 双轴电动搅拌机的主轴转速62转/分;电机功率 7.5kw;减速机型 JZQ350;内仓长度 2500mm;整机重量1.2吨。那么小型搅拌机的在操作上我们需要知道有哪些步骤呢？

Small blenders are divided into vertical blender, double shaft blender and wheel mill blender. They have low power consumption and easy operation. The main shaft speed of double shaft electric blender is 62 rpm; the motor power is 7.5kW; the reducer type is JZQ350; the inner bin length is 2500mm; and the whole machine weight is 1.2t. So what steps do we need to know about the operation of small mixer?

(1)固定式搅拌机应有牢靠的基础，移动式搅拌机应采用方木或撑架固定，并保持水平。

(1) The fixed mixer shall have a firm foundation, and the mobile mixer shall be fixed with square wood or bracket and kept horizontal.

(2)作业前应检查并确认传动机构、工作装置、防护装置等牢固可靠，操作灵活。三角胶带松紧度适当，搅拌轴两端密封良好。

(2) Before operation, check and confirm that the transmission mechanism, working device, protective device, etc. are firm and reliable, and the operation is flexible. The tightness of V-belt is appropriate, and both ends of mixing shaft are well sealed.

(3)启动后，应先空运转，检查搅拌叶旋转方向正确，方可加料加水，进行搅拌作业。加入的砂子应过筛。

(3) After start-up, the mixer should be idled first, and the rotation direction of mixing blade should be checked to be correct before adding materials and water for mixing operation. The sand added should be screened.

(4)运转中，严禁用手或木棒等伸进搅拌筒内，或在筒口清理灰浆

(4) During operation, it is strictly forbidden to put hands or sticks into the mixing drum or clean the mortar at the mouth of the drum

(5)作业中，当发生故障不能继续搅拌时，应立即切断电源，将筒内灰浆倒出，排除故障后方可使用。

(5) During the operation, when the mixing cannot be continued due to the fault, the power supply shall be cut off immediately, the mortar in the cylinder shall be poured out, and it can be used after the fault is eliminated.

(6)作业后，应机械内砂浆和积料，用水清洗干净，做好保养工作，切断电源，锁好箱门。

(6) After the operation, the mortar and accumulated materials in the machine should be removed, the water should be cleaned, the maintenance work should be done well, the power supply should be cut off, and the box door should be locked.

以上是由小型搅拌机的小编整理发布的，希望可以帮助到您，更多精彩内容可以点击一下：http://www.zkhntjbc.com

The above is sorted out and released by the editor of small mixer. I hope it can help you. For more wonderful content, click: http://www.zkhntjbc.com