混凝土搅拌机在搅拌任务中发挥着重要的作用，所以大部分时间它都是在工作中，所以日子一长，就会对设备产生很大的耗损，因此会时常出现各种各样的问题，比如说搅拌机水温升高，这可不算是一个好现象，下面我们来讲讲出现原因吧。

　　Concrete mixer in stir mission plays an important role, so most of the time it is at work, so the day a long, will produce very big loss to the equipment, so often appear all sorts of problems, such as mixer temperature rise, this is not a good sign, we talk about the reason below.

　　燃烧启动自动加料搅拌的操作流程不正确；自动加料搅拌水箱堵塞，外部堵塞应用水或气体；内部堵塞会影响冷却液的循环，同时会产生压力。这时候会有两种影响，一是水箱漏水，二是高速行驶时水温特别高；气缸损坏，燃烧室和水道被冲洗。此时，排水管会放水或冒白烟，导致水箱经常缺水；水道和油道冲洗干净（油有水呈白色）；水道与水道冲刷，形成缸体散热不良，特别是在高速运转时；散热风扇不转，散热风扇可由温控开关控制；它也可以由水温传感器控制。

　　The operation process of automatic feeding and stirring at combustion start is not correct; Automatic feeding mixing tank blockage, external blockage should be removed by water or gas; Internal blockage can interfere with coolant circulation and create pressure. At this time there will be two kinds of influence, one is the water tank leakage, the other is the water temperature is very high when driving at high speed; Cylinder damaged, combustion chamber and channel flushed. At this point, the drain will release water or smoke white, resulting in water tank often water; Water channel and oil channel wash clean (oil with water is white); Channel and channel erosion, the formation of poor heat dissipation cylinder, especially in high-speed operation; The heat dissipation fan does not work. The heat dissipation fan can be controlled by the temperature control switch. It can also be controlled by water temperature sensors.

　　另外，在使用混凝土搅拌机前，先用少量砂浆冲洗空腔，然后将砂浆刮掉，否则粘附在筒壁上的水泥砂浆会慢慢流失；然后根据实际需要称量不同的混凝土。原料，然后依次加入石子、沙子、水泥到混凝土搅拌机中；缓慢启动搅拌机，在搅拌过程中缓慢均匀地加水，将物料搅拌均匀。加料时间控制在两分钟以内；搅拌两分钟左右，将混合物倒在铁板上，然后用手搅拌大约一到两分钟，确保混合物充分搅拌；关闭电源并清洁仪器。

　　In addition, before using the concrete mixer, rinse the cavity with a small amount of mortar and then scrape off the mortar, otherwise the cement mortar adhered to the wall of the cylinder will be slowly lost; Then weigh the different concrete according to actual needs. Raw materials, and then add stones, sand, cement to the concrete mixer; Start the mixer slowly, add water slowly and evenly during the mixing process, and mix the material evenly. Feeding time is controlled within two minutes; Stir for about two minutes, pour the mixture onto the tin plate, then stir by hand for about a minute or two, making sure the mixture is well stirred; Turn off the power and clean the instrument.

　　因此，如果操作人员不想让自己的混凝土搅拌机时常出现问题的话，就需要在使用前后进行基本的保养以及检查工作，清洁工作也是重中之重，不可大意！更多相关内容的了解就来网站www.zkhntjbc.com看看吧。

　　Therefore, if the operator does not want to let their concrete mixer often problems, you need to use before and after the basic maintenance and inspection work, cleaning work is also a top priority, not careless! For more information, visit www.zkhntjbc.com.