How does the concrete mixer drive system work? The transmission system of concrete mixer plays the role of conveying mixing materials and cooperating with mixing drum in the work of mixer. It is an indispensable existence in the same position as the mixing drum and mixer accessories. So the key (explanation: analogy: an important component part of things) is the working part. What principle is used to carry out various works?

搅拌机传动系统(system)的 工作主要由搅拌马达、传动V带等零件带动的 ,对于搅拌电机来说,我们需要做到的 是:在完成接线工作后应该立刻对其进行防水处理,防止在清洗搅拌筒等区域是,将水淋到搅拌电机上,从而导致(cause)意外的 发生。

The work of mixer drive system is mainly driven by mixing motor, transmission V-belt and other parts. For the mixing motor, we need to do is: after completing the wiring work, we should immediately carry out waterproof treatment to prevent the water pouring on the mixing motor in the cleaning of mixing drum and other areas, resulting in (cause) accidents.

还有一点:在启动搅拌马达时,要检查搅拌筒内是否有物料的 残留,应将在物料全部后才能启动。

There is also a point: when starting the mixing motor, the first thing to check whether there is material residue in the mixing drum, should be in the material all cleared before starting.

对于传动V带,我们所需要做的 就是定期调整检查,特别是在次使用时,要做到每天检查传动带的 松紧状况。当经过一段时间的 使用出现老化现象之后,我们必须立刻更换,由于传动带变形或老化却不及时更换造成的 后果是严重的 ,要引起重视!

For the transmission V-belt, what we need to do is regular adjustment and inspection, especially in the second use, to check the tightness of the drive belt every day. After a period of time of use, aging phenomenon appears, we must immediately replace, because the belt deformation or aging but not timely replacement, the consequences are serious, we should pay attention to!

搅拌机传动装置设计过程中,合理利用了行星齿轮（Gear）传动的 原理,对传动装置中的 齿轮设计进行配齿计算,并对该装置中的 主要零件进行结构设计。该设计结构简单紧凑,体积（volume)小,极大地改进了原设计结构的 偏心、体积大的 不好的地方,成本低,且传动可靠、工艺合理、噪音低,得到用户的 认可。

In the design process of mixer transmission device, the principle of planetary gear transmission is reasonably used. The gear design in the transmission device is calculated, and the structure of the main parts of the device is designed. The design has the advantages of simple and compact structure and small volume, which greatly improves the disadvantages of the original design structure, such as eccentricity and large volume, low cost, reliable transmission, reasonable technology and low noise.